Sand filter with UV light and Heater 3Kw

Delivery from stock

This sandfilter, the UV-C Spalamp and ProfiHeater, together with the pump, will be pre-assembled on a basic plate and easy to mount. You don't need to adjust your hottub because the sandfilter has a prefilter.

The sandfilter is simple in use. You don't have to clean a sand filter often, just clean the water by the so called backwash. With this function the sand will be cleaned. You just have to refresh the sand every two to three years.

You can also fill the tank with glass or Aqualoon bolls made out of 100% polyethylene instead of sand.

By using this UV lamp you need 80% less chlorine in your pool or hottub.

The ProfiHeater of Blue Lagoon is 3kwH. This ProfiHeater will prevent that the water freezes in the cold winter months.


  • Size (lxwxh) 34x57x47cm
  • Pre-assembled on basic plate
  • Flow rate: 4 m3/hour
  • Pump power: 0.2HP
  • Connection: 50mm 1,5" on a 4-way valve
  • Filtersand: 18 kg (included) 
  • Filtertank: Blowmoulded PE
  • UV-C lamp: 11 Watt
  • ProfiHeater 3kwH
There is a strict requirement with the electricity supply for the ProfiHeater. It's desired to have an earth wall socket with a seperate 230 Volt/16 Ampère group on a earth leakage switch 30 mA.
Please be aware  that these electrical sockets should only be installed by a qualified electrical installation company.
Write Your Own Review
You're reviewing:Sand filter with UV light and Heater 3Kw
Copyright © 2020 Storvatt. All rights reserved.